Sound for Video Session: Sound Devices MixPre Re-Mix Demo

In the V2.10 firmware for the MixPre-3, 6, and 10T, Sound Devices added a handy set of new features called re-mix and re-record. This allows you to create a new mix of a previously recorded sound clip. Here’s how it works.

Gear and links discussed/used to record this episode: 

Sound Devices MixPre-3 - Audio Recorder & Mixer with 3 XLR and one 3.5mm inputs
Sound Devices MixPre-6 - Audio Recorder & Mixer with 4 XLR and one 3.5mm inputs
Sound Devices MixPre-10T - Audio Recorder & Mixer with 8 XLR and one 3.5mm inputs plus an integrated timecode generator
RODE Reporter Microphone - sounded really mid-range focused on this piece. This is the mic I used when explaining things.
Electrovoice RE-20 - Channel 1 microphone with high pass filter on the mic turned on
Shure SM57 - Channel 2 microphone
Audio Technica AT2005 - Channel 3 microphone, I’m always surprised at how well this holds up to much more expensive microphones. Can also be used as a USB mic in a pinch, though it doesn't sound as good with it's in-built analogue to digital converter.

Copyright 2018 by Curtis Judd 

Music - MzA by Cary Judd, used with permission

Ethics statement: Some of the links above are affiliate links which means that if you click on them and buy, I get a small commission. You don't pay more by clicking these links than if you just went to the retailer’s web site on your own. I use the proceeds to buy additional gear to review and help you improve your sound, lighting, and video. Thanks for your support!