Sound for Video Session: Fixing Clipped Audio with Safety Track in Adobe Audition

In this week's Sound for Video Session we walk through one way to fix clipped/distorted audio by replacing the clipped portion with audio from a safety track.

Not sure what a safety track is? Have a listen, it's all explained in this session!

Links to gear we discussed or used to record this session:

RODE VideoMic Pro+ (Newest version introduced in August 2017 with safety track recording feature)

Zoom F4 Audio Recorder - includes safety track recording feature

Zoom F8 Audio Recorder - Includes safety track recording feature

Panasonic GH5 Camera - The sample audio clip was recorded from RODE VMP+ to this

Copyright 2017 by Curtis Judd

Sound for Video Session: Sound Devices 633 Setup Basics

In this week's Sound for Video Session we walk through the basics of setting up your Sound Devices 633 for recording.

Links to gear we discussed or used to record this session:

Sound Devices 633 Audio Mixer/Recorder - my main pro-level recorder

Shure SM58 Vocal Microphone - I wanted to record this session with a dynamic microphone because there was a lot of wind outdoors and some gremlins watching TV upstairs. I don’t love the sound of this mic for recordings like this, especially on my voice, but it is a reliable mic and good to have one in the kit.

Panasonic GH5 Camera - This session shot on the GH5

Olympus 45mm f/1.8 Lens - This session shot with this lens

Copyright 2017 by Curtis Judd

Timecode Demo with NanoLockit from Ambient Recording

What is timecode and when does it help make things easier for finishing your video or film project? When you’re shooting a project with a LOT of clips and you’re recording your sound separate from camera to get the highest quality sound, syncing can be a lot of work. Using the timecode generators like the Ambient NanoLockit can save you a lot of time. Here’s how it works at a high level.

Links to Gear Discussed and Used to Record This Session:

Ambient Recording NanoLockit Timecode Generator (2 pack)

Single NanoLockit

Sound Devices MixPre-6 Audio Recorder

Sound Devices 633 Audio Recorder/Mixer

Blackmagic Design Ursa Mini Pro Cinema Camera

Panasonic GH5 Camera

Olympus 45mm f/1.8 Lens

Copyright 2017 by Curtis Judd 

Photos of the Ambient Master Lockit are copyrighted by B&H Photo and used here with permission.

Atomos Recorders: Why do I Use Them?

Will an Atomos Ninja Inferno or Shogun make your video footage look 10 times better? Probably not, but I have found that the Atomos recorders are great tools which make getting better footage easier, more efficient, and in some cases you really can get better footage. In this episode we cover how Atomos recorders help filmmakers.

Links to Gear Discussed and Used to Record This Session:

Atomos Ninja Inferno (UHD up to 60 fps, HDMI input, HDR)

Atomos Shogun Inferno (UHD up to 60 fps, HDMI and SDI inputs, HDR)

Atomos Shogun Flame (UHD up to 30 fps, HDMI and SDI inputs, HDR)

Atomos Ninja Flame (UHD up to 30 fps, HDMI input, HDR)

Atomos Ninja II (HD up to 30 fps, HDMI input)

Panasonic GH5 Camera

Panasonic 12-35mm f/2.8 OIS Lens

Olympus 45mm f/1.8 Lens

Copyright 2017 by Curtis Judd

Sound for Video Session: Cleaning Up Background Noise from dialogue recordings in Audition and RX

In this week's Sound for Video Session I show an example of how to reduce the noise (fairly extreme background noise) in a dialogue recording using Adobe Audition and Izotope RX 6.

Links to gear we discussed or used to record this session:

Focal Solo6 Be - Top-end professional near-fields from Focal. Beryllium tweeter. These are the monitors I finally decided to purchase for my mixing work - just to follow up from last week's session where we talked monitors.

Electrovoice RE20 Dynamic Broadcast Microphone - this is what I used to record my voice for this session

Antelope Audio Orion Studio Audio Interface - this is what I used to record my voice for this session.

Copyright 2017 by Curtis Judd

Sound for Video Session: Some Thoughts on Near-field Monitors/Speakers

In this week's Sound for Video Session I talk more about my search for the right near-field monitors for my post and mixing work. In that quest, I had a chance to listen to several more including those listed below. Still no final decision, but I’ve very tempted by the Focal Solo6 Be. My pocketbook is not quite so sure. :)

Links to gear we discussed or used to record this session:

KRK Rokit 8 G3 Near-field Active Monitors

Focal CMS 65 - Same as the 40s but with 6.5 inch woofers and bass response that reaches a little lower on the spectrum. These are on closeout so a good time to buy if you’re in the market.

Focal Shape 65 - These are the newer versions of the CMS. Will be included in our upcoming comparison

Focal Solo6 Be - Top-end professional near-fields from Focal. Beryllium tweeter

Presonus R65 AMT Near-field Monitors - pretty impressive “budget” option with ribbon tweeters

Adam A7x Near-field Monitors - Adam made the ribbon tweeter a bit more mainstream. Great sounding mid-range monitors

Antelope Audio Orion Studio Audio Interface (This is what I used to drive all of the monitors we tested)

Copyright 2017 by Curtis Judd

Indoor Boom Microphones: Oktava MK-012, RODE NT5, Audio Technica AT4053b

In my efforts to help you choose a microphone for recording dialogue indoors, here is another comparison of three cardioid (to hyper-cardioid) options: The Oktava MK-012 (cardioid), RODE NT5 (cardioid) and the Audio Technica AT4053B (hyper-cardioid). We take a closer look and listen with female and male sample clips, demonstrations of off-axis sound rejection, off-axis phase issues or coloration, handling noise, self-noise, and my overall impressions. I hope you find it helpful!

Links to gear discussed and used to record this episode:

Oktava MK-012 (cardioid capsule)

Oktava MK-012 (hyper-cardioid capsule “Movie Set”)

RODE NT5

Audio Technica AT4053b

Sound Devices 633 Audio Recorder/Mixer:

Blackmagic Design Ursa Mini Pro Camera (talking head shots were filmed with this:

Panasonic GH5 Camera

Panasonic 12-35mm f/2.8 OIS Lens

Copyright 2017 by Curtis Judd

Sound for Video Session: Mixing a Commercial - Foley, Effects, Music

In this week's Sound for Video Session we have a quick look at a commercial mix I’m working on at the moment. We run through each sound effect/foley, and music track, the effects applied and talk briefly about fader automation.

Links to gear we discussed or used to record this session:

Presonus Faderport Motorized Fader and Control Surface:

Focal CMS 65 Near Field Monitors - Same as the 40s but with 6.5 inch woofers and bass response that reaches a little lower on the spectrum. These are on closeout so a good time to buy if you’re in the market.

Focal Shape 65 Near Field Monitors - These are the newer versions of the CMS. Will be included in our upcoming comparison

Electrovoice RE20 Dynamic Broadcast Microphone (this is the mic I used for this session)

Antelope Audio Orion Studio Audio Interface (This is what I used to record my sound for this session)

Copyright 2017 by Curtis Judd

6 Affordable Lavalier Microphones Compared

One of the least expensive ways to improve the quality of your video is to use a microphone that you can get close to your talent/actors. Here are six affordable lavalier microphones that will help. We chose an assortment to work with your smartphone, DSLR or interchangeable lens cameras, your laptop or PC, or even GoPro action cameras.

Links to Gear Discussed and Used to Record This Session:

Dutch Kings Lavalier Microphone (For smartphones or GoPro)

Aputure A.lav EZ (for smartphones)

RODE smartLav+ (for smartphones)

Aputure A.lav (for smartphones, cameras, and PCs with headset inputs)

Comica Dual Head Lavalier Microphone (for recording 2 people into smartphones, cameras, PCs, or GoPros)

Sony ECM-CS3 Stereo Lavalier Microphone (for cameras)

RODE SC3 Adapter (If your microphone has a TRRS plug - 3 colored rings on the plug - and you want to use if for your camera or audio recorder, use this adapter)

RODE SC4 Adapter (If your microphone has a TRS plug - 2 colored rings on the plug - and you want to use it for your smartphone or PC with a headset input, use this adapter)

Panasonic GH5 Camera

Panasonic 12-35mm f/2.8 OIS Lens

Copyright 2017 by Curtis Judd

Sound for Video Session: Sync, Blending Mics, Recorder Setup, Mouth Noise, Loudness, Multicam

In this week's Sound for Video Session we discuss some of your questions:

- How to fix audio that drifts out of sync
- I have several mics, how do I blend them? When should I use which?
- How should I set up my Zoom F4?
- How can I manage mount noises in voice overs?
- How do I (batch) fix clips which are not the same loudness?
- How do I send audio from my MixPre to three cameras for a multi-cam shoot?

Previous episodes referenced:

Booming a camera-top Shotgun Microphone:

Loudness Export Option in Premiere Pro:

Links to Gear Discussed and Used to Record This Session:

XLR Microphone Cable - Your basic 25 foot long XLR microphone cable

RODE VXLR 3.5mm to XLR Adapter - use this to adapt the RODELink receiver's 3.5mm output to XLR for input into your Zoom F4 recorder

Tascam DR-60DmkII Audio Recorder - Nice intro level audio recorder with 2 XLR inputs

RODE NT2A Large Diaphragm Condenser Microphone - nice option for voice over work if you're recording in a room that doesn't have a lot of reverberation issues

Electrovoide RE20 Dynamic Broadcast Microphone - Used to record me for this session. Better option if your room does have a lot of reverberation.

Copyright 2017 by Curtis Judd